SuperDoctor 5 (SD5) Release Notes
================================================
sd5-version=5.7.0
Software Release Version: SuperDoctor5_5.7.0_build.921
Release Date: 2018-10-18

Introduction
============
SuperDoctor 5 (SD5) is an agent system that runs on monitored hosts designed by Supermicro to provide local system health and information.   
SD5 supports a web-based interface program (SD5 Web) and a command line interface program (sdc) for server management.


Requirements
============
* Hardware:
   	Supermicro baseboard
   	Free Disk Space: 200 MB
   	Available RAM: 64 MB
   	An Ethernet network interface card
   
* Operating system:
    Red Hat Enterprise Linux Server 5.x (64-bit), 6.x (64-bit), 7.x (64-bit) 
  	SUSE Linux Enterprise 11.x (64-bit), 12.x (64-bit)
    Windows Server 2008 R2 64-bit
    Windows Server 2012 R2 64-bit
    Windows Server 2016 64-bit
  
    Note that SuperDoctor 5 might be run on the operating systems not in the support list but not fully validated by Supermicro.
    
* Web browser on a client
    Internet Explorer 11.x or higher version
    Firefox 3.x or higher version


Package Contents
============  
- crc32.txt																		CRC code
- ReleaseNote.txt																Release note
- SD5_MIB.zip																	SD5 MIB files 
- SuperDoctor5Installer_5.[x].[y]_build.###_linux_x64_[YYYYMMDDHHmmss].bin		SuperDoctor 5 installer for 64-bit Linux
- SuperDoctor5Installer_5.[x].[y]_build.###_windows_x64_[YYYYMMDDHHmmss].exe	SuperDoctor 5 installer for 64-bit Windows
- SuperDoctor5_UserGuide.pdf													SuperDoctor 5 User's Guide
- installer_agent.properties													SuperDoctor 5 silent mode installation file (example)


Installation and Upgrade Instructions
=====================================

Please refer to the user guide.


Version History
===============

SuperDoctor5_5.7.0_build.921
========================
Enhancements
-------
1. Upgraded used SUM Windows and Linux package to sum_2.1.0 build 20180903 version.
2. Upgraded used IPMI library to build 20180824 version.
3. Changed built-in JRE version in SD5 to JRE 8 update 181.


Fixes
-----
1. Fixed FAN sensor definitions for C9Z390-CG and C9Z390-CGW motherboards.
2. Fixed SD5 cannot work when default temp folder is read-only under Linux platform.
 

SuperDoctor5_5.6.0_build.894
========================
New Features
-------
1. Added X9SCV-Q/QV4, X11SSN-H/L/E, A2SAP-H/E/L, C9X299-PG, C9X299-PGF, C9X299-RPGF, X11SRA, X11SRA-F, and X11SRA-RF sensor reading supports.
2. Added X11SSV-LVDS, and C7Z370-CG-L sensor reading supports.
3. Added C7Z370-CG-IW, C7B360-CB-M and C7B360-CB-MW sensor reading supports.
4. Added C7Z390-PGW, C9X299-PG300, X11SCA, X11SCA-W, X11SCQ and X11SCQ-L sensor reading supports.
5. Added the support for SD5 to show temperature2 reading (the current temperature of battery hotspot) of Power Supply if available.
6. Added X11SCZ-Q, X11SCV-Q, X11SCV-L, X11SAN-WOHS, C7C242-CB-M and C7C242-CB-MW sensor reading supports.
7. Added Slot ID support for PCH SATA drives(X11 Purley platform equipped with BMC is supported). 
8. Added C7Z390-CG-iW, C9X299-PG300F, and C7B360-CB-ML sensor reading supports.
9. Added X11SSN-H-WOHS, X11SSN-H-VDC, X11SSN-E-VDC, X11SSN-L-VDC, X11SSN-E-WOHS, and X11SSN-L-WOHS sensor reading supports.
10. Added network name and speed fields for Network on SystemInfo of SD5 Web.
11. Added A2SAN-H-WOHS, A2SAN-L-WOHS, A2SAN-E-WOHS, C9Z390-CG-IW, C9Z390-PGW, C9Z390-CG, and C9Z390-CGW sensor reading supports.


Enhancements
-------
1. Changed sensor items for X11DPL-I.
2. Changed browser requirement of Internet Explorer for SD5 from 8.x to 11.x.
3. Changed built-in JRE version in SD5 from JRE 8 update 112 to JRE 8 update 141.
4. Upgraded used SUM Windows and Linux package to sum_2.0.1 build 20180420 version for X11 and H11 support.
5. Upgraded used IPMI library to build 20180604 version.
6. Changed the started field of Service on the system information page to status.
7. Changed Temp sensor definitions for X11SSN-H/L/E.
8. Changed the file structure in SD5 MIB files by splitting SD5 module from SUPERMICRO-SSM-MIB.my into SUPERMICRO-SD5-MIB.my file.
9. Changed the unit of Memory speed to MT/s on the system information page for the support of SMBIOS 3.1.
10. Changed Email format of Recipients and Sender to support more than 2 alphabetic characters on the last string of Email address.
11. Renamed "IPMI" category to "BMC" in the page of System Information on SD5 Web.
12. Refined System Information view and moved RAID information into Storage category; removed "RAID" tab.
13. Changed SD5 Installer and SD5 drivers to support Secure boot or Windows may block the installation of unsigned drivers (Windows Server 2012 R2 and Windows Server 2016 only).
14. Removed 4 fields(Cylinders, Sectors, Tracks, and Heads) from Hard Disk list under Onboard Controller category on SystemInfo of SD5 Web.
15. Changed sensor definitions for C9X299-PG300.
16. Changed Peripheral Temp setting for X11SCQ and X11SCQ-L.
17. Changed "Inquiry Data" field into "Model", "Serial Number" and "FW Revision" for drives behind RAID controller under the Storage category on System Info page.
18. Changed SUPERMICRO-SD5-MIB.my file for supporting above three fields in RAID drives.
19. Changed default SSL protocol on SD5 side to TLS v1.2. (Note that due to the security enhancement, SSM should use version equals to or newer than 2.5.0 build 808 in order to manage this version of SD5)
20. Removed default anonymous SSL ciphers used on SD5. (Note that due to the security enhancement, Nagios NRPE should use version equals to or newer than 3.0.0 in order to manage this version of SD5) 
21. SD5 Web will redirect HTTP to HTTPS automatically.
22. Refined System Information view by removing column or row where positioned cells are blank.
23. Changed SUPERMICRO-SD5-MIB.my file for supporting CPU ID field in Processor and Slot ID field in Disk.
24. Enhanced System Information tree by fixing its location when scrolling up and down System Information pages.
25. Removed PCH Temp definitions for C7B360-CB-M and C7B360-CB-MW motherboards.
26. Changed the 5VSB to VDIMM for X11SCZ-Q.
27. Swapped CPU_FAN1 and SYS_FAN1 sensor definitions for C7Z390-CG-IW and C9Z390-CG-IW motherboards.
28. Swapped SYS_FAN1 and SYS_FAN2 sensor definitions for C7Z390-PGW and C9Z390-PGW motherboards.
29. Fixed FAN name and PCH Temp definitions for X11SCV-L and X11SCV-Q motherboards.


Fixes
-----
1. Fixed SD5 cannot show vbat battery for X11 purley.
2. Fixed the unknown dimm issue of memory health by following BIOS's new definitions of ecc for X11 Purley platform.
3. Fixed SD5 cannot start up correctly due to the incompatible JNA(Java Native Access) library installed by users themselves.
4. Fixed chassis intrusion definitions for X11SCV-L, X11SCV-Q, and X11SCZ-Q motherboards.


SuperDoctor5_5.5.0_build.784
========================
New Features
-------
1. Added Windows Server 2016 64-bit into supported OS list.
2. Added X11SSW-TF, X11SSW-4TF, X11DPT-SA-SG007, X11DAI-N, X11DPT-B and X10DRW-SE-EI007 sensor reading supports.
3. Added X11SAA, X11SSH-GF-1585, X11SSH-GF-1585L, X11SSH-GTF-1585, X11SSH-GTF-1585L, X11SPW-CTF, X11SPW-TF, and X11DPT-PS sensor reading supports.
4. Added X11SAN, A2SAN-H/L/E and C7B250-CB-ML sensor reading supports.
5. Added chassis intrusion for X11SSH-GF-1585, X11SSH-GF-1585L, X11SSH-GTF-1585, and X11SSH-GTF-1585L.
6. Added X11DPI, X11DPI-T, B2SS1-H-MTF, B2SS2-H-MTF, X11DPL-I, X11DPT-SB-SG007, X11SPH-NCTPF, and X11SPH-NCTF sensor reading supports.
7. Added K1SPE-P, and X10SDV-4V+-TLN4F sensor reading supports.
8. Added X10DRG-Q-CS045-P, C7Z270-CG-M, C7B250-CB-MK, A2SAN-H, A2SAN-L, and A2SAN-E sensor reading supports.


Enhancements
-------
1. Swapped System Temp and Peripheral Temp sensor definitions for A2SAV, A2SAV-L, and X11SAA.
2. Changed the built-in JRE version in SD5 from JRE 8 update 102 to JRE 8 update 112.
3. Changed SIO to a15/a16 sensor definitions for X11SAN, A2SAN, and A2SAN-H/L/E.
4. Upgraded used SUM Windows and Linux package to sum_1.7.0 build 20170428 version.
5. Upgraded used IPMI library to build 20170504 version.
6. Changed sensor items for X11DPL-I.


Fixes
-----
1. Fixed the unclear error message while SD5 Web fails to online install smartctlmoon package.
2. Fixed SD5 cannot show watchdog sensor on MicroBlade servers.
3. Fixed false alarm of BBU states in RAID. 
4. Fixed SD5 cannot send test trap on Windows Server 2016.
5. Fixed board id conflict between X8DTU-6+ and C7SIM-Q motherboards.
6. Fixed SD5 Installer keeps popping up warnings of security update KB3033929, even though it has already installed. 
7. Fixed unknown controller name, model, serial number for NVME hard drives on the Disk Drive of SystemInfo of SD5 Web on RHEL 7.x system.
8. Fixed missing PSU sensor readings on X10DGO motherboard.
9. Fixed chassis intrusion for X11SSV-M4 motherboard.
10. Fixed missing HDDs on RHEL 7.3 system.


SuperDoctor5_5.4.1_build.734
========================
Additions
-------
1. Added C7Z270-CG-L, C7Z270-CG, C7Q270-CB-ML, C7H270-CG-ML, C7Z270-PG, A2SAV, A2SAV-L, B1SD1-16C-TF, B1SD2-16C-TF, B1SD2-TF-PE014, B2SS1-CPU, B2SS1-MTF, B2SS2-MTF, H8QGL-6F, and K1SPI-TF sensor reading supports.
2. Added X11SSV-M4, X11SSV-M4F, X10SDV-16C-TLN4F+, X10SDV-12C-TLN4F+, X10SDV-8C-TLN4F+, X10SDV-4C-TLN2BF, X10SDV-CIBQ-AM041, X10SDV-IBQ-AM041, X10SDV-CIBF-AM041, and X10DRT-P-G5-NI22 sensor reading supports.
3. Added the support for SD5 Tray configuration in SD5 installer and added the [install_folder]\tray\enable_tray.bat script to enable SD5 Tray manually after installation (Windows platform only).

Changes
-------
1. Upgraded used SUM Windows and Linux package to sum_1.6.1 build 20160818 version.
2. Upgraded jetty web server to version 9.3.9.
3. Changed the internal implementation of RAID function by using StoreCli to replace MegaCli which has Windows driver limitations.
4. Changed the content and the structure of the RAID tree and its implementation of representation.
5. Changed the attributes of BBU and RAID disks on health information page due to the implementation changes.
6. Upgraded used SUM Windows and Linux package to sum_1.6.1 build 20160901 version.


SuperDoctor5_5.4.0_build.703
========================
Additions
-------
1. Added X10SDD-F, X10SD7-AC107, X10SRW-LN4F-II008, X10SRM-F, X10SRM-TF, X10SDV-TP8F, X10SDV-7TP4F, X10SDV-7TP8F, X10SDV-4C+-TP4F, X10SDV-2C-7TP4F, and X10SDV-2C-TP8F sensor reading supports.
2. Added X10DRU-XLL, X10DRT-PS-LC009, X10DSC-TP4S, X10DAC, X10OBI, and X10QBI-DC023 sensor reading supports.
3. Added X11SAT-F, X11SSW-LN4F-II008, X11SRE-DS018, X11SSQ-L, X11DRU+, X11DRI, A2SDI-H-TP4F, A2SDI-H-TF, A2SDI-TP8F, A2SDI-LN4F, K1SPE(-T), and P8DTU sensor reading supports.
4. Added system tray support for non-administrator Windows account to start up on SD5 desktop.
5. Added BHDGT, B2SS1-CF, X10SDE-DF, X11SRE-IO-DS018, X10DSN-TS, X10DRL-LN4, K1SPE-IN001, K1SPI-KA-SG007, and K1SPI-KB-SG007 sensor reading supports.
6. Added X10SDV-8C+-LN2F, X10SDV-4C-TLN2F, X10SDV-16C+-TLN4F, X10SDV-16C-TLN4F, X10SDV-12C-TLN4F, X10SDV-6C-TLN4F, X10SDV-6C+-TLN4F, X10SDV-4C-TLN4F, X10SDV-4C+TLN4F, and X10SDV-2C-TLN2F sensor reading supports.
7. Added the support for showing Legacy BIOS boot or UEFI boot in bootup state field of computer system on the system information page.
8. Added C7C232-CB-ML, C7Q170-CB-ML, C7H170-CB-ML, X9SKV-1105, X10SDV-16/12/8C-TLN4F+, X10DRI-1U-UC014, X11DPU+, B1SD2-TF-PE014, and B2SS1-F sensor reading supports.


Changes
-------
1. Changed sensor names for B2SS2-F, B10DRT, X10SDV-F, X10SDV-TLN4F, X10SDV-8C-TLN4F, X10SRA, X10SRA-F, X10DRT-P-NI22, C7X99-OCE, and C7X99-OCE-F.
2. Upgraded used SUM Windows and Linux package to sum_1.6.0 build 20160318 version.
3. Changed built-in JRE version in SD5 from JRE 8 update 51 to JRE 8 update 77.
4. Upgraded used InstallAnywhere program for SD5 from 2008 Professional edition to 2015 Premier edition.
5. Changed the i18n(internationalization) property location of SD5.
6. Changed sensor names for X10DAL-I, X10SD7-AC107, X10SRM-F, and X10SRM-TF.
7. Changed built-in JRE version in SD5 from JRE 8 update 77 to JRE 8 update 92.
8. Upgraded used SUM Windows and Linux package to sum_1.6.1 build 20160519 version.
9. Enhanced SD5 installer to clean folders before installation.
10. Enhanced SD5 installer to detect if Windows security update package (KB3033929) is installed, if not, stop the installation. 
11. Upgraded used SUM Windows and Linux package to sum_1.6.1 build 20160624 version.


Fixes
-----
1. Fixed SD5 cannot get sensor readings on X10DAI motherboard when system boots into UEFI mode on Windows 10.
2. Fixed SD5 cannot get DMI information on X10DAI motherboard and thus cannot start up successfully.
3. Fixed SD5 service cannot start up on RHEL 7 when install folder contains space.
4. Fixed SD5 installer cannot detect SNMP service is installed on non-English locale of Windows platforms.
5. Fixed SD5 could report false alarms when detecting the chassis intrusion of BMC.

Removals
-------
1. Removed 32-bit OSes from supported OS list.
2. Removed +5VDual sensor for H8DGU-LN4 REV 3.5a and VBAT for B10DRT series.


SuperDoctor5_5.3.0_build.663
========================
Additions
---------
1. Added the support for BIOS flashing on X9 MBs or later Linux platforms (X11 MBs are not included). 
2. Added C7Z170-M, C7H170-M and X10SDV-8C-TLN4F sensor reading supports.
3. Added X11SSV-Q, X11SSH-TF, X11SSH-CTF, X11SSE-F, X11SSL-CF, X11SSL-NF and X11SSW-F sensor reading supports.
4. Added the support for SD5 Web to accept IPv6 address in HTTP/HTTPS URL in browser to connect to.
5. Added the support for SD5 to send SNMP traps to IPv6 addresses.
6. Added X10SDV-8C-TLN4F, X10DRS-3U, X10DRS-4U, X10QBL-4CT, X10DRG-O+-CPU, X10DSC+, X11SSW-F, and X11SAE-M sensor reading supports.
7. Added C7Z170-OCE, X9DRX+-F-CS045, B1SD1-TF, B10DRC, and B2SS2-F sensor reading supports.
8. Added PCH Temp sensor reading for X11SSQ, X11SAE and X11SAE-M.
9. Added B2SS2-F, X10DSC+ and X11SSD-F sensor reading supports.
10. Added X11SSZ-F, X11SAT, X10DRFR-N-LC019, X10QBL-4 and X10DRT-PS sensor reading supports.
11. Added FAN5 sensor reading for X10DSC+ and FAN4 sensor reading for X10SDV-F, X10SDV-TLN4F, and X10SDV-8C-TLN4F.


Changes
-------
1. Changed the update system BIOS utility for X9 MBs or later from AFUWIN to SUM package (X11 MBs are not included).
2. Changed built-in JRE version in SD5 from JRE 6 update 43 to JRE 8 update 51.
3. Changed the reading of "Max Power Capacity" field in Power Supply of SystemInfo of SD5 Web from hexadecimal representation to watt.
4. Improved the user interfaces to change user account and password on SD5 Web.
5. Upgraded used SUM Windows and Linux package to sum_1.6.0 build 20151007 version for supporting in-band UpdateBios on X11 MBs.
6. Upgraded used IPMI library to build 20150819 version for supporting IPMI information on X11 MBs.
7. Changed FAN1 to CPU FAN and VPCH 1.5V to VPCH 1.0V for X11SSQ. 
8. Changed the ChangeJVM utility for not allowing JVM version older than 1.8.0.
9. Upgraded used SUM Windows and Linux package to sum_1.6.0 build 20151106 version for bug fixes.
10. Changed System Temp setting for X11SAE and X11SAE-M and sensor items for X11SSZ-TLN4F and X11SSZ-QF.
11. Changed 3V3SB to 3.3VSB for B1SD2-TF and B1SD1-TF.
12. Changed FAN name to MB_FAN3, MB_FAN4, FAN1~FAN3 for X10DRT-P-NI22, X10DRT-P, X10DRT-TP, X10DRT-PIBQ, and X10DRT-PIBF. 
13. Upgraded used SUM Windows and Linux package to sum_1.6.0 build 20151211 version for bug fixes.
14. Enhanced SD5 installer to use built-in drivers by stopping TAS and SD3 if exist, then restart. 
15. Upgraded used IPMI library to build 20151201 version.
16. Upgraded used Apache Commons Collections library to 3.2.2 version for insecure concern.
17. Upgraded jetty web server to version 9.

Removals
--------
1. Removed "Characteristics", "Input Voltage Probe Handle", "Cooling Device Handle", and "Input Current Probe Handle" fields from Power Supply of SystemInfo of SD5 Web.
2. Removed FAN2, FAN3, P1-DIMMA1 and P1-DIMMB1 sensor readings for X10SLL-S and X10SLL-SF
3. Removed FAN6-FAN8 for X10DRD-LTP-TW008.

Fixes
-----
1. Fixed SD5 Web cannot show DIMM errors on X10DRH-CLN4 motherboard.
2. Fixed the validation for the command line options of sdc.
3. Fixed SystemInfo, sdc and selftest bugs on Windows 10 Enterprise edition.
4. Fixed the manufacturer of SD5 service to Supermicro company name on Windows platforms.
5. Fixed unknown dimm errors on SD5 Web on X11SSH-LN4F.


SuperDoctor5_5.2.0_build.615
========================
Additions
---------
1. Added X10DRX, X10DRT-XA-SG007, X10DRT-BA-SG007, X10DRT-HA-SG007, X10DRT-HB-SG007, X10DRFF-iG, 
	X10DRFF-CG, X10DRFF-iTG, and X10DRFF-CTG sensor reading supports.
2. Added X10DAL-I,  X10DRT-L, X10DRT-LIBQ, X10DRT-LIBF, X10SDV-F, X10SDV-TLN4F, X10DRD-L, X10DRD-LT, X10DRD-IT, X10DRD-INT
	X10SLQ-L, B1SD2-TF and X10SRD-F sensor reading supports.
3. Added BIOS flashing jumperless solutions for X10 Windows platforms.
4. Added online installation on SD5 Web and sdc for smartctlmoon package if smartctlmoon is not installed on Windows platforms.
5. Added X10DRS, X10DRD-INTP, X10DRD-ITP, and X10DRD-LTP sensor reading supports.
6. Added support for monitoring the memory health of SD5 on Windows platforms.
7. Added a reminder for screen resolution on SD5 Web.
8. Added a serial number after a hard disk name for clearer identification of disks.
9. Added X10DRT-D-SG007, X10DRT-DAYTON, X10DDW-IN, X10DAX_X10DAI, X10QRH+, K1SPI, K1SPI-T, and C7Z170-SQ sensor reading supports.
10. Added B10DRG-TP, B10DRG-IBF, B10DRG-IBF2, X11SSA-F, and X11SSI-LN4F sensor reading supports.
11. Added FAN7 and FAN8 for X10DDW-I and X10DDW-I3.
12. Added SD5 supports to save events in Windows System Event Log and Linux system logs.
13. Added X11SSQ, X11SSL, X11SSL-F, X11SSM, X11SSM-F, X11SBA-F, X11SBA-LN4F, B10DRI, X10DRT-P-NI22, X11SAE, X11SAE-F, 
	X10DGQ, X10DRG-OT+ and X10DRG-O+ sensor reading supports.
14. Added support for LSI MegaRAID 3108.


Changes
-------
1. Changed chip code for C7X99-OCE-F, C7X99-OCE, and X10SRA.
2. Set sensor default thresholds according to thermal design guide.
3. Changed the way to read SD5 Web localization from a zipped SSMAgentWeb-xxx-build.xxx-prop.jar to a folder.
4. Integrated the FRU information to "Power Supply Type" under the "SystemInfo" of SD5 Web.
5. Changed the definition of SD5 check commands used by SSM. 
6. Enhanced the user interfaces for OS event log in "Alert Configuration" on SD5 Web and sdc.

Fixes
-----
1. Fixed incorrect memory sorting on monitored page of SD5 Web.
2. Fixed incorrect version number on version page of SD5 Web.
3. Fixed busType for X7DB8, X7DGU, X7DWU, X7DWP, X7DWN+, X7DWN, X7DW3, X7DWA, X7DBI, X7DBU, and X7DBN.
4. Fixed SD5 cannot flash BIOS on X10SBA, X10SBA-L, X10SDV-F, X10SDV-TLN4F, and B1SD2-TF motherboards.
5. Fixed typo in returned message after executing sdc -reset command.
6. Fixed inaccurate response returned when executing SD5 power control.
7. Fixed the display of logical volume from SMART health monitoring and hard drives on the Disk Drive of SystemInfo on SD5 Web and sdc.
8. Fixed SystemInfo table shift issues when browser is resized.
9. Fixed sensor reading issues for X9DRT-XA/XB/HA/HB/HA-K/HB-K, X9SPV-M4.
10. Fixed a memory leak on CentOS7 by upgrading Java Service Wrapper library to version 3.5.26.


SuperDoctor5_5.1.0_build.564
========================
Additions
---------
1. Added X10DRL-CT, X10DRL-IT, X10DRL-C, B9QR7, B10DRT Series, X10DRD-I, X10QBL, X10QBL-CT, C7X99-OCE, X10SRA, A1SRM-LN7F-2758, A1SRM-LN5F-2358, A1SRM-LN7F-2358,
 X10DRT-HIBF, X10DRW-E, X10DRW-ET, X10DRW-N, X10DRW-NT, X10DRH-I, X10DRH-IT, X10DRH-CT, and X10DRH-C sensor reading supports.


Fixes
-----
1. Fixed SD5 cannot read overall status of PWS-1K66P-1R power supply.
2. Fixed SD5 cannot provide correctly SNMP information pass through SNMP getnext command.
3. Fixed airflow temperature check mechanism in S.M.A.R.T. check. 


Removals
--------
1. Remove LAN Temp for X10DRT-P, X10DRT-PIBQ, and X10DRT-PIBF.



SuperDoctor5_5.1.0_build.547
========================
Additions
---------
1. Added X9DRD-C/I(N)T+, X10SRA-F, X10SRG-F, X10DRU-I+, X10DRI, X10DRI-T, X10DRG-H, X10DRG-HT, X10DRU-X, X10DRG-Q, X10DBT-T, X10DBT, X10DRT-H, and X10DAX sensor reading supports.
2. Added C7X99-OCE-F, C7Z97-M, C7Z97-MF, H9SKV-420, A1SRM-LN7F/LN5F, A1SA2-2350F, B9QR7, B10DRi, B1SL1 and B1SL1-F sensor reading supports.
3. Added sensor support of PWS-1K28D-240, PWS-503D-240, PWS-706P-1R, PWS-707P-1R, PWS-656P-1H, PWS-656S-1H, PWS-661P-1R, PWS-662P-1R, PWS-1K68A-1R, PWS-655P-1HS, PWS-1K02A-1R, PWS-1K66P-1R, and PWS-750P-1R.  
4. Added 3 system information types to the SystemInfo of SD5 Web including OEM Strings, System Configuration Options, and Power Supply.
5. Added "Version", "Serial Number", "SKU Number", and "Family" fields to Computer System of SystemInfo of SD5 Web.
6. Added "Type" and "OEM-Defined Value" fields to Chassis of SystemInfo of SD5 Web.
7. Added "Manufacturing Date" and "Speed" fields to Physical Memory of SystemInfo of SD5 Web.
8. Added system information support on RHEL 7 including Disk Drive, Network, Service, Time Zone and OS caption.
9. Enhanced the updating status of BIOS flashing to SD5 Web and sdc.


Changes
-------
1. Changed slave address for sensor reading supports of X9DRD-C/INT+, X9DRT-P, X9DRT-PT, X9DRT-PIBQ, X9DRT-PIBF REV1.02, and X10QBI. 
2. Added TR1 and TR2 temperature support for A1SA7.
3. Changed system temperature to peripheral temperature for X10SBA and X10SBA-L.
4. Returned OK status even the check result of X10SBA fan is critical when RT2 temperature is low.
5. Changed the layout of Network on SystemInfo of SD5 Web.
6. Changed the host address to host name (host address) in the title of E-Mail Alert.


Fixes
-----
1. Fixed total size on Physical Memory page of SystemInfo of SD5 Web on Linux.


Removals
--------
1. Removed chassis intrusion support for X10SRE-DS018.
2. Removed power supply support for X10DAI.

 

SuperDoctor5_5.1.0_build.524
========================
Additions
---------
1. Added BIOS flashing supports on X10 Windows platforms (Intel Grantley platform is not included in the support list).
2. Added all-in-one health status in SSM MIB files to represent the health of all built-in hardware sensor readings such as fan speeds, temperature, and so on.
3. Added X10SLH-N6-ST031, X10DDW-I, X10DDW-I3, X9DRD-C/INT+, A1SA7 and A1SA2-2350F sensor reading supports.
4. Added SD5 installer supports to install on 64-bit RHEL 7 platforms.



SuperDoctor5_5.1.0_build.516
========================
Additions
---------
1. Added sensor reading supports for Wellsburg SMBus Controller.
2. Added model and revision information of power supply to sdc.


Changes
-------
1. Changed layout and logo in SD5 user's guide.
2. Renamed Dimm to DIMM for X10 UP sensors.


Removals
--------
1. Removed useless raid definitions in SSM MIB files.
 
 
Fixes
-----
1. Fixed SD5 cannot retrieve RAID information when CacheCade is configured.
2. Fixed wrong ME FW Version when NM is 3.0.



SuperDoctor5_5.1.0_build.509
========================
Additions
---------
1. Added X10DAI, X10SRH-F, X10DRFR, X10DRFR-T, B1SA4-2750F, and B1SA4-2550F sensor reading supports.
2. Added "KCS Base Address" field to IPMI of SystemInfo of SD5 Web.


Changes
-------
1. Change default user name and password to ADMIN and ADMIN.
 

Fixes
-----
1. Fixed missing hard drives on the Disk Drive of SystemInfo of SD5 Web on Ubuntu Server.
2. Provided a workaround for avoid taking long time to get BBU states in RAID while using SNMP walk.



SuperDoctor5_5.1.0_build.494
========================
Additions
---------
1. Added "IPv6 Address" field to Network of SystemInfo of SD5 Web.
2. Added "NM Revision" and "ME FW Version" fields to IPMI of SystemInfo of SD5 Web.
3. Added X10QBi, X10SRE-DS018, X10SRW-F, X10SRL-F, X10SAE, X10SAT, X10SRI-F, X10DRFF, X10DRW-I, X10DRW-IT, 
	X10DRT-P, X10DRT-PT, X10DRT-PIBQ, X10DRT-PIBF, X10DRL-I, X10DRC-T4+, X10DRi-T4+, X10DRC-LN4+, X10DRi-LN4+,
	X9DAi, X9ORG-OF, X9SAE-V, X9DRG-O(T)F, X9DB3-CPU-AI026, C7Z97-OCE, C7Z87, C7Z87-OCE, and A1SA2-F sensor reading supports.
4. Added user guide document to Windows menu item and to Linux desktop.
5. Added self test function to Windows menu item and to Linux desktop.
6. Added a download link of user guide on SD5 Web. 


Changes
-------
1. Check OS environment to avoid 32-bit SD5 installer installing on 64-bit OS.
2. Upgraded used Java Native Access library in SD5 to version 3.5.2. 


Fixes
-----
1. Fixed missing hard drives on the Disk Drive of SystemInfo of SD5 Web on Ubuntu Server.
2. Fixed SD5 service cannot start on servers with some time zones by upgrading Java Service Wrapper library to version 3.5.23.


SuperDoctor5_5.1.0_build.443
========================
Additions
---------
1. Added user-defined threshold functions for monitored items on SD5 Web and sdc.
2. Added support for completing SD5 installation without restarting the Windows operating system.
3. Added A1SRI, A1SAM-2750F, A1SAM-2550F, A1SAM-2758F, A1SAM-2558F, A1SRM-2558F, A1SRM-2758F, B1SA4-F, X9SKV, X9SAE-V, X9DRH-iF, 
	X9DRT-P, X9DRT-PT, X9DRT-PIBQ, X9DRT-PIBF, X10SRE-DS018, X10SLL-F, X10SLL-SF, X10SLL, X10SLL-S, X10SLL-F-CKD, X10SLX-F, X10SBA and X10SBA-L sensor reading supports.
4. Added support for monitoring of SMART health on Windows and it requires the smartctl utility to be installed first. 


Changes
-------
1. Changed default install folder of SD5 to C:\Program Files\Supermicro\SuperDoctor5 on Windows and /opt/Supermicro/SuperDoctor5 on Linux.
2. Upgraded used MegaCli tool in SD5 to Windows version 8.07.07 and Linux version 8.07.10.
3. Changed the implementation of parsing physical drive to reflect the MegaCli output changes.
4. Changed the supported language names on SD5 Web.
5. Redefined variables in the silent mode installation property file.

Removals
--------
1. Removed max clock speed (MHz) of processors in the system information page.

Fixes
-----
1. Fixed user account in the system information page got timed out in some Windows domain environment.
2. Fixed invalid page returned while the testing SNMP trap receiver is not available. 

		

SuperDoctor5_5.0.1_build.428
========================
Additions
---------
1. Added FRU information to the SystemInfo of SD5 Web. 
2. Added more system information types for SD5 Windows platform including Computer System, Desktop Monitor, Floppy, Keyboard, 
		Port Connector, Parallel Port, Pointing Device, Serial Port, Computer Summary, Startup Command, and Video Controller. 
3. Added power control functions to SD5 Web and sdc.
4. Added BIOS flashing functions to SD5 Web and sdc (H8, X8, X9 and X10 series MBs; SD5 Windows platform only).
5. Added system tray support (pop-up alerts) on SD5 desktop. (SD5 Windows platform only)
6. Added X10SLL+-F, X9DRG-HTF+II, X9DRG-HF+II, X9DRG-HF+II/HTF+II, X9DBS-F(-2U), X10SEAA, X10SAT, X10SLV, X10SLE-DF, X9DRW-CF/CTF
		, X9SKV-B915, X9SKV-1125, X10SLV-Q, X10SLL-HF-CKD, A1SAi, A1SAi-2550F, and A1SAi-2750F sensor reading supports.
7. Added "Send Test Trap" button on SD5 Web.


Fixes
-----
1. Fixed missing PCH temperature sensor on X10SAE/X10SAT/C7Z87/X10SLQ motherboards.
2. Fixed incorrect reading of CPU temperature sensor on X10SAE/X10SAT/C7Z87/X10SLQ motherboards.
3. Fixed the message "The I2C/SMBus device isnot available" shown on the SD5 Web on X10SAE/X10SAT/C7Z87/X10SLQ motherboards. 
4. Fixed invalid enterprise value in the content of SNMP trap sent by SD5.
5. Fixed incorrect physical disk number returned in SD5 while using check_nrpe -c compound_health in Nagios.


SuperDoctor5_5.0.0_build.421
========================
Additions
---------
1. Based on last stable version of SSM Agent released on April 18th, 2013 to initially release as SuperDoctor 5 (SD5).

Fixes
-----
1. Fixed missing power supply sensor on the SD5 Web on X9DRG-HF+II motherboard.
2. Fixed network adapter information on SystemInfo of SD5 Web on Windows that contains some virtual devices.
3. Fixed incorrect version information in the SuperDoctor 5 command line program(sdc).



Known Issues, Limitations & Restrictions
========================================
1. SD5 does not support the hardware monitoring on SuperBlade servers.
2. Memory health information does not support Supermicro desktop motherboards and must be BIOS supported.
3. SMART status of Storage health information requires the smartctl utility to be installed first.
4. All RAID related function in SD5 supports LSI MegaRAID 2108, 2208, and 3108 controllers. For RAID controller compatible HDDs, please refer to the Supermicro web site for an up-to-date list.
5. X8DTT-F version 1.02 does not support power supply information.
6. All functions in SD5 supports Supermicro X8 and newer motherboards only.
7. BIOS flashing function supports Supermicro motherboards newer than H8, X8, and X9 series on Windows platforms and motherboards newer than X9 series on Linux platforms.
This function needs both BIOS support of SMI E7h command and SUM (in-Band) support of UpdateBios command for Supermicro motherboards newer than X9 series.
C7Q67, C7Q67-H, C7B75, C7Z87-OCE, X10DAi, X10DAC and X10DAX do not support BIOS flashing function.
9. System tray function is supported on Windows platforms only.
10. The system information contents are platform dependent. Types including Desktop Monitor, Floppy, Keyboard, 
Port Connector, Parallel Port, Pointing Device, Serial Port, Computer Summary, Startup Command, and Video Controller are supported on Windows platforms only.
11. If your SD5 host is not equipped with BMC, you could see a warning mark next to the "Supermicro BMC Driver" name in Device Manager on Windows platform.

 
Technical Support
=================
Web Site:        www.supermicro.com
Headquarters:    support@supermicro.com
European Branch: support@supermicro.nl
Asian Branch:    support@supermicro.com.tw
