//***************************************************************'\\

			FJDT ver 5.00
	Copyright (c) 1999-2001  Fujitsu Limited. All Rights Reserved.


\\***************************************************************//

July 31, 2001

This file contains immediate information for use with the FJDT ver. 5.00

---------------------
DISCLAIMER
---------------------

The FJDT ver. 5.00 is provided "as is" without any 
warranty of any kind, either expressed or implied, including, but not 
limited to, the implied warranties of merchantibility and fitness for 
a particular purpose. The entire risk as to the quality and performance 
of the program is with you. In no event will FUJITSU LIMITED or any of 
its subsidiaries be liable to you for any damages, including any general,
special, incidental or consequential damages arising out of the use or 
inability to use this program ( including but not limited to any loss of 
profit or savings, loss of data or a failure of the program to operate 
with any other programs), even if FUJITSU LIMITED or any of its 
subsidiaries has been advised of the possibility of such damages.


_________________________________________________________

-------------------------------------------
Version History 
-------------------------------------------
Version 0.92 - Date: May 24, 1999 			
	- Added F10 as the Abortkey.
	- Included the status bar showing the test progress for Quick Test.
	- Expanded the scope of the status bar for Comprehensive Test.
	- Modified the code for Media Scan Inner Area to properly access up to the end.

Version 0.99 - Date: June 7, 1999			
	- Modified the code to properly read the sense key, sense code and subense code.
	- Added the Log File Count parameter for the log file and the Recover Flag for every drive error being logged.

Version 1.00 - Date: June 18, 1999			
	- Changed SUCCESS and FAILURE to PASS and FAILrespectively.
	- Changed the tool name from FJ-IDE Diagnostic Tool for End Users to Fujitsu ATA Hard Disk Drive Diagnostic Tool.

Version 1.12 - Date: July 1, 1999				
	- Modified the address of test log for PB12H.

Version 1.13 - Date: July 9, 1999				
	- Revised the Disclaimer text.

Version 1.14 - Date: September 1, 1999
	- Support for PB14 and HN12 models.

Version 1.15 - Date: September 21, 1999
	- Modified the RWR sequence to WR sequence.

Version 1.16 - Date: September 27, 1999
	- Modified the error message displayed on@valid FJ models.

Version 1.20 - Date: January 22, 2000
	- Support for PB15/15H drive models.
	- Modified the log saving area from SA-4, Hd 1, Sct 0 to SA-4, Hd 0, Sct 0.

Version 2.05 - Date: April 28, 2000
	- Support for HN13/13L drive models.
	-Modified the error message being displayed

Version 2.10 - Date: June 28, 2000
	- Changed command timeout from 10 to 20 seconds.

Version 3.00 - Date: July 14, 2000
	- Support for PB16 series drive models.

Version 3.10 - Date: November 17, 2000
	- Changed command timeout from 20 to 60 seconds.

Version 4.00 - Date: March 5, 2001
	- Added HN14L support.

Version 5.00 - Date: July 31, 2001
        - Support for PB17H/HN15L drive models.
        
*** IMPORTANT NOTE ***

Program versions other than the ones listed above is considered to
be an unofficial release or beta version. Please always update your 
copy and use the latest official release/version.
	
_________________________________________________________


-------------------
CONTENTS:
-------------------

1) About the program
2) File size and build time
3) User's Guide	 ( Note:   Pls. read this part before using the program ) 	

			- o - o - o -

---------------------------------------
1. ABOUT THE PROGRAM
---------------------------------------
FJDT ver. 5.00 is provided for use in checking FUJITSU IDE drives for possible 
defects/problems at the user side.
This program version only works with the following FUJITSU IDE drive models:

2.5 inch drives: 

	{ "FUJITSU M2714T",    HN6 },
	{ "FUJITSU M2713T",    HN6 },
	{ "FUJITSU M2712T",    HN6 },			

	{ "FUJITSU M2724TA",   HN7 },
	{ "FUJITSU M2723TA",   HN7 },
	{ "FUJITSU M2722TA",   HN7 },			
	
	{ "FUJITSU MHA2032AT", HN8 },
	{ "FUJITSU MHA2021AT", HN8 },
	{ "FUJITSU MHB2021AT", HN8 },
	{ "FUJITSU MHA2027AT", HN8 },
	{ "FUJITSU MHA2016AT", HN8 },
	{ "FUJITSU MHA2010AT", HN8 },
	{ "FUJITSU MHA2005AT", HN8 },			

	{ "FUJITSU MHC2040AT", HN9 },
	{ "FUJITSU MHC2032AT", HN9 },
	{ "FUJITSU MHD2032AT", HN9 },
	{ "FUJITSU MHD2021AT", HN9 },			

	{ "FUJITSU MHE2064AT", HN10 },
	{ "FUJITSU MHE2054AT", HN10 },
	{ "FUJITSU MHF2043AT", HN10 },
	{ "FUJITSU MHF2032AT", HN10 },
	{ "FUJITSU MHF2021AT", HN10 },			

	{ "FUJITSU MHG21xxAT", HN11 },
	{ "FUJITSU MHH2064AT", HN11 },
	{ "FUJITSU MHH2032AT", HN11 },			

	{ "FUJITSU MHJ2xxxAT", HN12 },			
	{ "FUJITSU MHK2xxxAT", HN12 },			

	{ "FUJITSU MHL2xxxAT", HN13 },
	{ "FUJITSU MHM2xxxAT"' HN13 },
	{ "FUJITSU MHN2xxxAT", HN14L}	

	{ "FUJITSU MHR2040AT", HN15L}
   { "FUJITSU MHR2030AT", HN15L}
   { "FUJITSU MHR2020AT", HN15L}
   { "FUJITSU MHR2010AT", HN15L}
   
3.5 inch drives: 
---------------------

	{ "FUJITSU M1636TAU",  PB9 },
	{ "FUJITSU M1638TAU",  PB9 },
	{ "FUJITSU M1623TAU",  PB9 },
	{ "FUJITSU M1624TAU",  PB9 },		

	{ "FUJITSU MPA3xxxAT", PB10 },

	{ "FUJITSU MPB3064ATU E",  PB11E },
	{ "FUJITSU MPB3052ATU E",  PB11E },
	{ "FUJITSU MPB3043ATU E",  PB11E },
	{ "FUJITSU MPB3032ATU E",  PB11E },
	{ "FUJITSU MPB3021ATU E",  PB11E },
	{ "FUJITSU MPB3010ATU E",  PB11E },		

	{ "FUJITSU MPB3064AT",  PB11 },
	{ "FUJITSU MPB3052AT",  PB11 },
	{ "FUJITSU MPB3043AT",  PB11 },
	{ "FUJITSU MPB3032AT",  PB11 },
	{ "FUJITSU MPB3021AT",  PB11 },
	{ "FUJITSU MPB3010AT",  PB11 },			

	{ "FUJITSU MPC3032AT",  PB12 },
	{ "FUJITSU MPC3043AT",  PB12 },
	{ "FUJITSU MPC3064AT",  PB12 },
	{ "FUJITSU MPC3084AT",  PB12 },
	{ "FUJITSU MPC3096AT",  PB12 },
	{ "FUJITSU MPC3102AT",  PB12 },			   
	{ "FUJITSU MPC3065AH",  PB12 },

	
	{ "FUJITSU MPD3xxxAT", PB13 },			

	{ "FUJITSU MPE3xxxAT", PB14 },			

	{ "FUJITSU MPF3102AT", PB15},			
	{ "FUJITSU MPF3153AT", PB15},			
	{ "FUJITSU MPF3204AT", PB15},			
	{ "FUJITSU MPF3102AH", PB15H},			
	{ "FUJITSU MPF3153AH", PB15H},			
	{ "FUJITSU MPF3204AH", PB15H},

	{ "FUJITSU MPG3xxxxxxx", PB16},

	{ "FUJITSU MPH3xxxAH", PB17H},

--------------------------------------------
2. FILE SIZE and BUILD TIME
--------------------------------------------

To ensure correct operations, please check if your copy of the 
program conforms with the ff. specifications:

	File Size  : 229, 534 Bytes
	Build Time : 07-30-01  2:17 pm 


--------------------------
3. USER'S GUIDE
--------------------------

3.1. Requirement

	a) Operating System : DOS 

	* This version has only been tested from DOS 5.0 above

	b) CPU: IBM-PC compatibles -> 80x86 CPU-Based motherboards 


3.2. Running the program

*Note: 	You cannot run this program under WINDOWS environment. 
		
	3.2.1. Boot from a clean DOS disk.
	3.2.2. Change to the drive/directory where FJDT.EXE is located.
	3.2.3.  Syntax:  
		A> FJDT
	   
4. TEST SEQUENCES/SCHEDULES
---------------------------

FJDT ver. 5.00 runs the ff. test sequence on attached or selected IDE device.

Note: Comprehensive Test is performed only when the drive passed the Quick Test.

I. Quick Test

	a) Pre-SMART Check
	
	b) Buffer Write/Read Test 
	
	c) Media Scan for Outer Area (LBA first 150MB)

	d) Media Scan for Inner Area (LBA last 50MB)
	
	e) Fundamentl Seek Test (Random Seek and Random Read)
	
	f) Post-SMART Check

II. Comprehensive Test

	a) Media Scan for All Area
	
	b) Post-SMART Check
	
   		
5. TEST RESULTS 
---------------

After performing FJDT tests, the program will log all the drive informations.
 HN6_14, PB9_16: on SA-4, Head 0, Sector 0.
 HN15L: Use FAToolLog on SA.


6. CONTACT INFO
---------------

For technical support, you may contact your nearest FUJITSU local distributor.

